Description
Rotary Scrubbers are used to wash crushed rock, ore, sand, gravel, and building stone.
Well-tech Rotary Scrubbers are cylindrical drums with internal lifters, supported by four trunnion rollers at either end as well as trust rollers. The continuous lifting and dropping action combined with water helps to abrade, scrub, and break down soluble contaminants.
Well-tech machines its Rotary Scrubbers to ensure a perfect concentric body, eliminating any undue vibration or bounce. This ensures the scrubber runs quieter and smoother with reduced tire and bearing maintenance, ultimately leading to longer life.
CONFIGURATIONS INCLUDED: CHAIN DRIVE, TIRE DRIVE, OR GEAR DRIVE.
The YK circular vibrating screen consists of eccentric shaft vibration exciter, screening box, motor, base, and supporting device.
The motor via V-belt drives the eccentric shaft vibration exciter produce high-speed rotation. High speed causes the eccentric block gets a strong centrifugal force, then the screening box vibrating with certain amplitude of circular movement, the objects on the inclined screen continuously jumping and throwing by momentum from the screening box , during this movement, all objects less than the sieve will through the sieve go into the discharge chute.
Advantages and Characteristics
Capacities are normally determined by analysing the type of feed material, percent and type of waste material to be removed, screen analysis of the feed, and available water. Retention time in a Rotary Scrubber varies from application to application due to different types and varying amounts of wastes to be removed.
Rotary Scrubbers are used to wash crushed rock, ore, sand, gravel, and building stone.
Well-tech Rotary Scrubbers are cylindrical drums with internal lifters, supported by four trunnion rollers at either end as well as trust rollers. The continuous lifting and dropping action combined with water helps to abrade, scrub, and break down soluble contaminants.
Well-tech machines its Rotary Scrubbers to ensure a perfect concentric body, eliminating any undue vibration or bounce. This ensures the scrubber runs quieter and smoother with reduced tire and bearing maintenance, ultimately leading to longer life.
CONFIGURATIONS INCLUDED: CHAIN DRIVE, TIRE DRIVE, OR GEAR DRIVE.
The YK circular vibrating screen consists of eccentric shaft vibration exciter, screening box, motor, base, and supporting device.
The motor via V-belt drives the eccentric shaft vibration exciter produce high-speed rotation. High speed causes the eccentric block gets a strong centrifugal force, then the screening box vibrating with certain amplitude of circular movement, the objects on the inclined screen continuously jumping and throwing by momentum from the screening box , during this movement, all objects less than the sieve will through the sieve go into the discharge chute.
Advantages and Characteristics
- Sizes ranging from 0.9m (3ft) diameter to 4.6m (15ft) diameter
- Mine-Duty Construction
- Drive options to suit customer preference
- Rubber-lined for wear and abrasion protection (other lining options available)
- Lifter bars designed to promote solid particle contact and scrubbing
- Modular frame option available for drum mounting
Capacities are normally determined by analysing the type of feed material, percent and type of waste material to be removed, screen analysis of the feed, and available water. Retention time in a Rotary Scrubber varies from application to application due to different types and varying amounts of wastes to be removed.
Technical Specifications
| Model | Drum Size (m) | Screen size (mm) | Feeding size (mm) | Water pressure (Mpa) | Every ton of ore water required (M3/t) | Capacity (T/h) | Rotation speed (r/min) | Power (Kw) | Weight (T) |
| RX1030 | Φ1.0×3.0 | ≥5 | ≤100 | 0.4~0.5 | 1.5~4 | 30~50 | 25~28 | 15 | 4800 |
| RXT1230 | Φ1.2×3.0 | ≥5 | ≤100 | 0.4~0.5 | 1.5~4 | 50~70 | 23~25 | 18.5 | 5800 |
| RXT1530 | Φ1.5×3.0 | ≥5 | ≤150 | 0.4~0.5 | 1.5~4 | 70~90 | 18~22 | 22 | 6200 |
| RXT1545 | Φ1.5×4.5 | ≥5 | ≤150 | 0.4~0.5 | 1.5~4 | 80~120 | 18~22 | 30 | 6900 |
| RXT1560 | Φ1.5×6.0 | ≥5 | ≤150 | 0.4~0.5 | 1.5~4 | 90~130 | 18~22 | 37 | 8300 |
| RXT1845 | Φ1.8×4.5 | ≥5 | ≤170 | 0.4~0.5 | 1.5~4 | 100~130 | 20~21 | 45 | 11800 |
| RXT1860 | Φ1.8×6.0 | ≥5 | ≤170 | 0.4~0.5 | 1.5~4 | 110~140 | 20~21 | 45 | 12800 |
| RXT2060 | Φ2.0×6.0 | ≥5 | ≤210 | 0.4~0.5 | 1.5~4 | 120~160 | 19~20 | 55 | 14800 |
| RXT2265 | Φ2.2×6.5 | ≥5 | ≤230 | 0.4~0.5 | 1.5~4 | 160~180 | 19~20 | 55 | 16500 |
Q: What Information should customers give to us?If rock ore, max feeding size? Capacity?
2) If alluvial/placer ore,contain sticky clay ore? If yes, more than 30% or not? and -5mm materials percentage? Capacity? Mineral elements and content?
Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?A: Yes, we have a laboratory equipped with complete mining equipment which including jaw crusher, hammer mill, ball mill, jig, gold centrifugal concentrator, spiral chute, slurry pump, mixing tank, shaking table, dry magnetic separator, wet magnetic separator, three disc magnetic separator, electric separator etc. So we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.Q: How long is the guarantee of your equipments? Does your company supply the spare parts?A: The warranty period of is one year, if break during this guarantee period, we need to replace new one for you AT NO COST. And of course we will supply the spare parts for you for life-long time at lowest cost.Q: If i need the complete mineral processing line. Can you help us build it?A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experienced engineers team of us, these 12 engineers always fly out of China to install, debugging our equipments on site and trainning the buyer's staff. --- PRE-SALE SERVICE
1.Based on clients' request and budget, our experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to us for testing by courier, or, the customer take the sample to our factory for testing;it's free
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.--- AFTER-SALE SERVICE ---1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term--- ONE STOP SOLUTION ---
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.Why Choose Us?-Quality: Guarantee
-Delivery: On Time
-Communication: In Time
-After-Sales Service: Excellent
-Engineer Team: Professional & more than 20 years experience on site
-Price: Competitive
Welcome you visit our factory when you are free, I will arrange our driver to pick you up from Airport for free and book hotel for you in advance.Well-Tech International Mining Equipment
We have 7 big workshops, and one professional full equipped mineral testing laboratory. Our laboratory has jaw crusher, hammer crusher, ball mill, spiral chute, jig, gold centrifugal concentrator, shaking table, slurry pump, mixing tank, wet/dry magnetic separator, electric separator etc. Our equipments have been exported to more than 58 countries up to now.