Wholesale Salt Powder Ultrasonic Vibrating Screen Equipment

Product Description is able to convert electric energy with 220V,50Hz or 110V,60Hz into high frequency with 18KHz and then puts it into ultrasonic energy changer to make it change into mechanical vibration with 18KHz and attains the purpose of high efficiency sieve and cleaning mesh, which makes it easy to sieve the super fine p

Featured Products

Product Description

is able to convert electric energy with 220V,50Hz or 110V,60Hz into high frequency with 18KHz and then puts it into ultrasonic energy changer to make it change into mechanical vibration with 18KHz and attains the purpose of high efficiency sieve and cleaning mesh, which makes it easy to sieve the super fine powder.
Whole Sale Salt Powder Ultrasonic Vibrating Screen Equipment
 

Detailed Photos

Whole Sale Salt Powder Ultrasonic Vibrating Screen Equipment

Customer site

Whole Sale Salt Powder Ultrasonic Vibrating Screen Equipment

Working principle

The ultrasonic vibration wave (mechanical wave) attached to the screen makes the ultra-fine powder accept huge ultrasonic acceleration, so as to inhibit adhesion, friction, flat drop, wedge and other blocking factors, improve the screening efficiency and cleaning efficiency.
Whole Sale Salt Powder Ultrasonic Vibrating Screen Equipment

 

Maintenance tips

1.installation inspection:
(1)According to the identification of the connecting line of the ultrasonic generator, it is directly inserted into the interface and locked, so that the power supply of the ultrasonic generator and the ultrasonic interface of the sieve machine are connected correctly.
(2) The ultrasonic generator power on the fine-tuning spin to the minimum, turn on the ultrasonic generator power switch, investigate whether the ammeter is abnormal, (under normal circumstances, the current should be less than 200mA).

(3) Check and debug the three-dimensional vibrating screen filter, and make the material running track to reach the standard running track.
(4) 
Run the three-dimensional vibrating screen filter (rotary vibrating screen), throw a little material and fine-tune the screw on the power supply of the ultrasonic generator, so that the screen reaches an ideal condition.(Current should be less than 200mA)
(5) 
In the case of the ultrasonic vibrating screen is normal, you can uniformly feed and then enter the normal operation.
2. Daily maintenence:
(1) Before the start: (A) check whether the coarse and fine mesh is damaged.(B) check whether the each set of the clamp ring is locked. 
(2) At the start: (A) check whether there is abnormal noises.(B) whether the electricity current is stable.(C) whether there is unusual vibration.
(3) after using: clean up the machine as soon as finish using.
3.periodic maintenance:
(1) periodically check whether the coarse and fine mesh is fatigue and damaged.
(2) whether any parts of the machine is damaged by vibration.
(3) After the motor runs for two weeks, a timely lithium grease must be replenished.
(4) After 1500 hours of operation, check the bearing and replace it immediately if there is any damage.

 

Company Profile

 

20000 square meters special workshop area.  
More than 60 technical workers with more than 10 years screen manufacture experience.
 More than 30 professional sales and after--sale service personnel.
8 R&D technical engineers.
Whole Sale Salt Powder Ultrasonic Vibrating Screen EquipmentWhole Sale Salt Powder Ultrasonic Vibrating Screen Equipment

Packaging & Shipping


Package specification:

1.Small size accessories and maintenence tools are put into rubber bag and fixed on the machines.The machine and the rubber bag are wrapped in films .

2.big size accessories and maintemance tools are put into paper case.
3.Finally,all of them are put into wooden container.
4.We will begin the delivery after receiving your payment.
Inpect procedure before delivery:
1. machine: appearance, quantity, commissioning report,etc.
2. Packge: Integrity of packaging, instruction book , maintenance tools and accessories with the machine,etc.
3. Delivery: customer's name, mobile phone, adrress, way of shipping,etc.

Whole Sale Salt Powder Ultrasonic Vibrating Screen Equipment
 

Our service


Basis service
    1.Your sample material can be free analysis in our laboratory.
    2. 24 hours a week online & quick response within 12 hours.
    3.Booking hotel and ticket for customers and Free transportation during visit our factory.
    4. Production lead time and delivery time guaranteed.
Customized services
    1.Professional R & D team to develop the new products as you requirements.
    2.Help high-end customers to develop the local market
    3.All packing and shipping can customized as per your requirements.
After-sale services
 After customers received the goods,if have any questions or quality problems, Our customer service Dept. will be always available.

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours