Circular Vibrating Screen Silica Sand Separator

vibrating screen Product Introduction: GDS Quartz sand vibration screen is a device for the screening and grading of powdered and granular materials, made of special materials and processes for the quartz particle industry. The vibrating screen works by means of the reciprocating vibration produced by the vib

Featured Products

vibrating screen

Circular Vibrating Screen Silica Sand Separator
 

Product Introduction:

 GDS Quartz sand vibration screen is a device for the screening and grading of powdered and granular materials, made of special materials and processes for the quartz particle industry.

 The vibrating screen works by means of the reciprocating vibration produced by the vibrator excitation. The above rotating hammer of the vibrator makes the sieve surface produce planar circular vibration, while the lower rotating hammer makes the sieve surface produce cone circular vibration. Its vibration track is a complex space curve. The curve is a circle on the horizontal plane and an ellipse on the vertical plane. The amplitude can be changed by adjusting the excitation force of the up and down rotating hammer. By adjusting the spatial phase Angle of the upper and lower hammer, the curve shape of the sieve surface's motion track can be changed and the motion track of the material on the sieve surface can be changed

Circular Vibrating Screen Silica Sand Separator
 

Advantages:

1. Low energy consumption, high output, simple structure, easy maintenance.
2. Fully enclosed structure, no dust, full compliance with national environmental protection requirements.
3 Automatic discharge, more suitable for assembly line operations.
4. The equipment uses special materials and processes, especially suitable for quartz particle industry.

Circular Vibrating Screen Silica Sand Separator
 

Technical parameter:

 

Model Number of Plies   Screen Size (mm)  Screen Mesh   Feed Size (mm)  Capacity (t/h)  Power (kw)  Double Amplitude (mm)  Frequency (secondary / sub)   Sifting Angle (degree)  
GDS-6121-5600X12002-325< 20< 30.37X26-101460/9600-10
GDS-5201-5500X20002-325< 20< 50.37X26-101460/9600-10
GDS-5251-5500X25002-325< 20< 80.37X26-101460/9600-10
GDS-10201-51000X20002-325< 20< 120.75X26-101460/9600-10
GDS-10251-51000X25002-325< 20< 160.75X26-101460/9600-10
GDS-10301-51000X30002-325< 20< 201.1X26-101460/9600-10
GDS-12241-51200X24002-325< 20< 231.5X26-101460/9600-10
GDS-15251-51500X25002-325< 20< 281.5X26-101460/9600-10
GDS-15301-51500X30002-325< 20< 322.2X26-101460/9600-10

Working principle:

The linear vibrating screen with double vibration motor drive, When two vibration motors are rotating synchronously and reversely, the vibration force produced by eccentric block in parallel to the direction of the motor axis offset each other, in the fold is perpendicular to the direction of the motor shaft for a resultant force, so the trajectories of sieve machine for a straight line the two motor shaft relative screen surface has a Angle, the vibration force and material since the gravitational force, under the action of the material on the screen was thrown up by leaps and bounds ahead for linear motion, so as to achieve the purpose of the screening and grading the supplies

Circular Vibrating Screen Silica Sand Separator
 

Current maintenance:

1. Before starting up: check whether the coarse and fine meshes are damaged or not, and whether each bundle ring is locked

2. Start up: pay attention to whether there is abnormal noise, whether the power supply is stable, and there is no difference in vibration

YKR circular vibrating screen

YKR circular vibrating screen

3. After use: clean up after each use.

(1) check regularly whether the thick and thin mesh and spring are tired and damaged, and whether any part of the body is damaged due to vibration.

(2) the motor must be supplemented with a timely lithium base grease (ZL 1 3) after two weeks of operation. Run l500 hours, check the bearing and replace it immediately if it is damaged

Company Information

Circular Vibrating Screen Silica Sand Separator

Customers

Circular Vibrating Screen Silica Sand Separator

Packaging & Shippin

Circular Vibrating Screen Silica Sand Separator

Certifications
Circular Vibrating Screen Silica Sand Separator

Our Services

1. EPC service for single equipment and whole production line.

2.OEM service for your personal equipment or production line .

3.Testing before delivery  and Pretesting in working site until get qualified products .

4.24hours for technical Operation Guide and  4hours offer technical proposal for problem shooting. 


FAQ

Q: Why we believe in Weifang GuoteMining Equipment  Company?
A: 1. More than 10 years experience.


Q. We are the leading professional supplier of mining equipments and service for quartz mining equipment industry.
A. All products achieved ISO9001:2000 quality management certificate and EU CE certificate.

 

Q: Delivery time
A: The lead time is 10-30 days, delivery time will vary depending on the type of the machine, shipping method selected and part availability.

 

Q: Payment terms
A: Accepted Payment Type: T/T, L/C, Western Union, Cash.
After sign the contract, pay the 30% deposit of total purchase price and pay the full payment before delivery.

 

Q: What will you do if the machine is broken down?
A: The Products warranty is one year. We will provide the technical advice and find the solution immediately for you when the machine is in trouble. For those wear parts, we guarantee the high quality parts for long-term supply.

 

Q: What should I do if I want to get a best quotation?
A: If you want a suitable type for you, please let us know your material and capacity.


Contact Us

 

Contact: Rika Li (Sales manager)

 

 

 

 

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours